Using Your Dpp-450; Installing Standard Paper Rolls; Installing Label Paper Rolls - Infinite Peripherals DPP-450 User Manual

DPP-450 User Manual

Using Your DPP-450

Installing Standard Paper Rolls

The printer head should be cool before replacing the paper
roll. If the printer head is hot, touching it can result in
injuries.
1. Press the Paper Cover Release button down to open the
cover.
2. To set the paper size, pull the green lever, and then slide it
right for a small roll or left for a large roll.
3. Insert the new paper roll, and then pull the end of the
paper roll so that it is showing outside of the paper feed
area slightly.
4. Close the cover.

Installing Label Paper Rolls

You can drop and load a new paper roll into the printer
easily. Ensure the paper head is cool before placing the
paper roll into the printer.
1. Press the Paper Cover Release button to open the cover.
2. Slide the peeler up as shown.
3. Thread the label through the peeler, and then close the
paper cover securely.
13