Table of Contents
Advertisement
Available languages
Available languages
ENGLISH
Fitting the vacuum to the Chassis (Fig. F, G)
•
Slide the vacuum, nozzle first, into the chassis (7) until
an audible 'click' is heard as shown in figure F.
Note: Ensure that appropriate fixings for the type of wall
surface are used.
•
Place the appliance into the charging base (9) as shown
in figure H .
•
Plug the charger (10) into the charging base (9)
•
Plug the charger (10) into an electrical outlet.
•
Switch the electrical outlet on. The LED charging
indicator (14) will Illuminate (Fig. I).
Cleaning the filters (Fig. J, K,L )
•
Press the dust bowl release button (2) and lift out the
dust bowl (3) (Fig.J)
•
Lift the filter assembly (15) from the dust bowl (3)
(Fig.K).
•
Empty the dust bowl by lightly shaking over a dustbin.
•
The filter (16) can now be removed from the pre filter
(15) by rotating anti clockwise figure L.
•
Tap to empty excess dust and detritus from the filter, pre
filter and dust-bowl figure L1.
•
Rinse out the dust-bowl with warm soapy water figure
L1.
•
Wash the filters with warm soapy water figure L1.
•
Make sure the filters and dust-bowl are dry.
•
Refit the filters into the appliance.
•
Close the dust-bowl. Make sure the release latch (2)
clicks into place.
From time to time wipe the appliance with a damp cloth. Do
not use any abrasive or solvent-based cleaner. Do not
immerse the appliance in water.
Removing and cleaning the beater bar (Fig. M)
•
Pinch and lift the plastic tab on the pivoting clip (17)
away from the floor head.
•
Lift the beater bar (18) out of the floor head.
•
Ensure the beater bar and pivoting clip are replaced
before using the vacuum.
Maintenance
Your BLACK+DECKER cordless appliance has been
designed to operate over a long period of time with a
minimum of maintenance. Continuous satisfactory operation
depends upon proper tool care and regular cleaning.
Warning! Before performing any maintenance on cordless
appliances:
•
Run the battery down completely if it is integral and then
switch off.
•
Unplug the charger before cleaning it. Your charger does
not require any maintenance apart from regular
cleaning.
8
(Original instructions)
•
Regularly clean the ventilation slots in your
appliance/charger using a soft brush or dry cloth.
•
Regularly clean the motor housing using a damp cloth.
Do not use any abrasive or solvent-based cleaner.
Replacing the filters
The filters should be replaced every 6 to 9 months and
whenever worn or damaged. Replacement filters are
available from your BLACK+DECKER dealer (cat. no:
SVF11).
•
Remove the old filters as described above.
•
Fit the new filters as described above.
Protecting the environment
Separate collection. This product must not be
disposed of with normal household waste.
Should you find one day that your BLACK+DECKER product
needs replacement, or if it is of no further use to you, do not
dispose of it with other household waste. Make this product
available for separate collection.
•
BLACK+DECKER provides a facility for recycling
BLACK+DECKER products once they have reached the
end of their working life. This service is provided free of
charge. To take advantage of this service please return
your product to any authorised repair agent who will
collect them on our behalf.
•
You can check the location of your nearest authorised
repair agent by contacting your local BLACK+DECKER
office at the address indicated in this manual.
Alternatively, a list of authorized BLACK+DECKER repair
agents and full details of our after-sales service and
contact are available on the Internet at:
www.2helpU.com.
Technical Data
Voltage
Watt hours
Weight
Charger
Input Voltage (V
)
ac
Output Voltage (V)
Current (mA)
Approx charge time (h)
SVA420B
14.4V
28.8Wh
2Kg
JOD-S-180050BS
100-240
18
500
4
Advertisement
Table of Contents
