Table of Contents
Advertisement
ATTENTION!
No one must stand between tractor and trailer when performing accoupling procedure.
4.3.2. Preparing to work
When preparing the trailer for operation, it is necessary to check:
•
condition of traveling wheels and tyre pressure;
•
tightness of screws fixing traveling wheels and draught bar by applying force of 270 Nm;
•
condition of all other screw joints;
•
performance of lighting and signaling system of the trailer;
•
performance of braking system of the trailer;
•
condition and performance of locks of back door;
4.3.3. Loading the trailer
Loading the trailer must take place only when it is connected to tractor and positioned levelly.
Loading the trailer must be performed by taking following actions, minding its order and exercising special caution:
•
brake the tractor and the trailer with use of parking brake;
•
open lock of back door;
•
open out back door;
•
set gate and secure them;
•
let animals in;
•
secure animals by fixing them to purpose-made rod;
•
compact gates and secure them;
•
close and secure back door.
ATTENTION!
It is forbidden to exceed allowable load capacity of the vehicle, because it will be dangerous for road traffic and can damage the
machine.
4.3.4. Transportation
•
When driving on public roads you must observe road traffic rules;
•
It is forbidden to transport unattached animals;
•
Exceeding allowable load capacity of the trailer could cause its damage and create danger for road traffic
as well;
•
It is very important not to exceed allowable speed of 30 km/h and to adjust speed to weather conditions;
•
It is forbidden to leave the trailer unsecured. Securing the trailer consists in pulling parking brake;
•
When driving on public roads it is necessary to equip the trailer in certified or approved reflective triangle;
•
One must place low-speed vehicle board on the rear wall of the trailer, if the trailer is the last vehicle in the
aggregate.
17
Advertisement
Table of Contents
