Table of Contents
Advertisement
5.5. STORAGE AND MAINTENENCE
At the end of work, you must clean the machine thoroughly and wash it by applying a jet of water. In case you find
any damaged with relation to coat of varnish, you must clean these spots from dirt and dust, degrease and then
apply new layer of varnish, keeping in mind the same colour and thickness of protective coating. Before having
these spots varnished, you must protect them with use of grease or anti-corrosion agent.
It is recommended to keep the machine in closed and covered area. Keeping the machine outside for a longer
period of time, you must secure its body against negative weather factors, especially these, that cause steel
corrosion and forcing tyre ageing
24
Advertisement
Table of Contents
