4.2.4. Wiring system, lighting, signalization
Wiring system of the trailer KURIER 10 is designed to be supplied with constant current source of 12V. Connecting
wiring systems of the trailer and tractor must be performed with use of appropriate connector. Wiring system
schematic diagram of the trailer KURIER 10 was shown in the picture 8.
`
FIGURE 8.
Wiring system schematic diagram of the trailer KURIER 10
TOP(TOL) – rear contour lamp right (left), OTP(OTL) – number plate lamp right (left), ZP(ZL) – rear combined lamp
right (left), GT – 7-pin front socket.
Colour marking of leads:
c – black, k – red, n – blue, p – orange, r – pink, c/t – black green, t – green, z – yellow; 31 – mass, R(L) – right
(left) turn indicator, 58R(58L) – position lamp right (left), 54 – „STOP", „+" – supply + 12V. ATTENTION!. Covers
were show from leads input side.
15