Table of Contents
Advertisement
PRODUCT INSTALLATION INSTRUCTIONS Dispensing Towers
LUCKY AND PANTHER TOWER INSTRUCTIONS, Continued
Attaching the Air Distributor Cover
1. To comply with NSF standards, the air distributor cover should be installed. It can be easily
removed to access the valves on the air distributor.
2. Each end of the cover has a knockout to provide clearance for the gas line. Remove the
appropriate knockout.
3. Route the gas line through the side of the cover and hang the cover on the air distributor
bracket.
1
Checking the System for Leaks
1. It is important to ensure the entire system is leak free.
2. The system can be checked by doing a pressure decay test or by tapping the system and inspecting for product
leaks and checking for gas leaks with soap and bubbles. Repair any leaks immediately.
PERLICK CORPORATION 8300 W. Good Hope Road, Milwaukee, WI 53223 • 800.558.5592 • perlick.com
DISPENSING TOWERS
DRAFT ARMS, 2-6 FAUCET TEE TOWERS, LUCKY AND PANTHER TOWERS
19
Advertisement
Table of Contents
Need help?
Do you have a question about the Draft Arm and is the answer not in the manual?
Questions and answers