Siemens Geared motors-Planetary gear Instructions Manual page 19

4 Transport, Assembly
The specifications for transport, installation and assembly in the operating
instructions for the three-phase servomotors 1FK7 (order/item no. 610.40 700.21)
and 1FT6 (order/item no. 610.43 410.21) must be complied with.
4.1 Transport, Storage
Use suitable lifting tackle for transport and assembly.
Use suspension bands and lifting eyes for transporting the geared motors.
Lifting tackle as per 98/37/EU Directive for Machines, Appendix I.
Refer to the rating plate for exact specifications of the weight of geared motors.
Observe the transport regulations applying in the country/countries concerned.
Do not strike the shafts and their bearings!
A
Fig. 5 Examples for lifting and transporting
A with suspension bands (carrying rope)
Siemens AG
ENGLISH
Danger during lifting and transporting procedures!
Improper handling, unsuitable or defective devices, tools etc. can
cause injuries and/or property damage.
Lifting devices, floor conveyors and lifting tackle must conform to
the currently valid regulations.
The relevant safety regulations (e.g. VBG 8) for standing under
suspended loads must be complied with during assembly work on
the holding brake or on the brake motor.
610.40 072.01
CAUTION
WARNING
B
B with lifting eyes/chains
19