Checking Network Traffic - HIKVISION ERT-F204 Series User Manual

ERT-F2xxx DVR User Manual
Click OK to save the setting for the current port and return to the upper-level menu.
Click Apply to save the settings.
Enter the virtual server setting page of the router; fill in the blank of the Internal Source Port with the
internal port value, the blank of the External Source Port with the external port value, and other
required contents.
Each item should correspond with the device port, including server port, http port, RTSP port, and
https port.
The above virtual server setting interface is for reference only and may be different due to different
router manufacturers. Contact the router manufacturer if you have any problems setting a virtual
server.

Checking Network Traffic

Purpose:
You can check the network traffic to obtain real-time information of DVR such as linking status, MTU,
sending/receiving rate, etc.
Go to Menu > Maintenance > Net Detect.
UM ERT-F2xxx 030118NA
External Port Settings Dialog Box
Setting Virtual Server Item
109