Part Names And Functions - Panasonic GA-AS12TPoE+ Series Instruction Manual

1.4.

Part Names and Functions

Back
Front
See next page for
enlarged figure
Figure 1-1 External View (Example: GA-AS4TPoE+)
● Power port
Connect the supplied power cord into the port and connect the other end into
an electric outlet (AC 100-240 V).
● Power cord hook block
Hooking the supplied power cord on the block makes the cord less likely to be
unplugged from the power port.
● Ground terminal screw
If the electric outlet is not grounded, connect the grounding line (AWG18:
green/yellow) to the ground terminal screw.
● 10BASE-T/100BASE-TX/1000BASE-T ports (all ports)
10BASE-T/100BASE-TX/1000BASE-T compatible terminals, hubs, repeaters,
bridges, and switching hubs can be connected.
The length of the twisted pair cable (Cat5e or higher) connecting this switch
and a device must be 100 m or shorter.
● PoE power supply supported ports
(For GA-AS4TPoE+, GA-AS10TPoE+, and GA-AS12TPoE+; downlink ports)
Supports PoE power supply to IEEE802.3at/af compatible devices.
10BASE-T/100BASE-TX/1000BASE-T compatible terminals, hubs, repeaters,
bridges, and switching hubs can be connected.
The length of the twisted pair cable (Cat5e or higher) connecting this switch
and a device must be 100 m or shorter.
Power port MAC address label
Ground terminal screw
10BASE-T/100BASE-TX/1000BASE-T
Power cord hook block
Manufacture number label
14