Page 1
I N S T A L L A T I O N I N S T R U C T I O N S Shown with MTMS1U (sold separately) Fusion Depth Adjust Accessory Spanish Product Description German Product Description Portuguese Product Description Italian Product Description Dutch Product Description French Product Description FCADA...
5/8”. ACCESSORY: AN ACCESSORY is the secondary Chief product which is attached to a primary Chief product, and may have a component attached or setting on it. NOTE: Accessory is intended to be used with the following...
Page 3
Installation Instructions FCADA DIMENSIONS DIMENSIONS: INCHES [MILLIMETERS] SHOWN WITH MTMS1U SOLD SEPARATELY DIMENSIONS: INCHES [MILLIMETERS]...
FCADA Installation Instructions LEGEND Open-Ended Wrench Tighten Fastener Llave de Boca Apretar elemento de fijación Sechskantschlüssel Befestigungsteil festziehen Apertar fixador Chave de boas Chiave a punch Apertar Serrare il fissaggio Zeskantsleutel Bevestiging vastdraaien Clé à fourscore Serrez les fixations Hex-Head Wrench...
Page 5
(A) to the wall through the lower mounting hole. (See Figure 2) 12. Slide mount plate (B) into wall plate (A). (See Figure 3) 13. Adjust depth of FCADA and fasten with six 5/16 x 1/2” button head cap screws (D). (See Figure 3) Vertical center...
Page 6
FCADA Installation Instructions Attaching Mounting System Attach mounting system (not included) to FCADA accessory using four 5/16-18 x 1/2” button head cap screws (D). (See Figure 4) MTMS1U Mounting System shown as example (not included) (D) x 4 [FCADA shown at narrowest depth]...
Page 8
Europe A Franklinstraat 14, 6003 DK Weert, Netherlands P +31 (0) 495 580 852 F +31 (0) 495 580 845 Chief, a products division of Asia Pacific A Office No. 918 on 9/F, Shatin Galleria Milestone AV Technologies 18-24 Shan Mei Street...
Need help?
Do you have a question about the FCADA and is the answer not in the manual?
Questions and answers