Page 1
I N S T A L L A T I O N I N S T R U C T I O N S to Wall Mount to Cart/Ceiling mount to Above/Below Shelf (FCA821 shown) Fusion™ Center Accessory Shelf Spanish Product Description German Product Description Portuguese Product Description Italian Product Description...
Chief product to which an accessory and/or component is attached. ACCESSORY: AN ACCESSORY is the secondary Chief product which is attached to a primary Chief product, and may have a component attached or setting on it. COMPONENT: A COMPONENT is an audiovisual item 10 lbs (4.5 kg)
Installation Instructions FCA820/821 DIMENSIONS - FCA820 FUSION WALL MOUNT SETUP OVERALL MIN 0.50 12.7 MIN SHELF MAX ABOVE 9.81 EXTENSION CENTER OF MOUNT 249.2 OVERALL 0.50 WIDTH 12.7 MAX BELOW EXTENSION *NOTES: • FIXED FUSION INTERFACES ARE 0.5" DEEP • TILT FUSION INTERFACES ARE 0.5"...
Page 4
FCA820/821 Installation Instructions DIMENSIONS - FCA820 (CONTINUED) FUSION CEILING/CART MOUNT WITH ABOVE OR BELOW SHELF SETUP 8.00 203.2 *NOTES: • FCA623 DUAL MONITOR INTERFACES ARE 1.4" DEEP DIMENSIONS - FCA821 FUSION WALL MOUNT SETUP OVERALL MIN 0.50 12.7 MIN SHELF MAX ABOVE 9.81 EXTENSION...
Page 5
Installation Instructions FCA820/821 DIMENSIONS - FCA821 (CONTINUED) FUSION CEILING/CART MOUNT SETUP 0.50 12.7 MAX ABOVE MIN SHELF EXTENSION DEPTH* 7.88 CENTER OF MOUNT 200.0 OVERALL WIDTH 0.50 12.7 MAX BELOW EXTENSION *NOTES: • FCA623 DUAL MONITOR INTERFACES ARE 1.4" DEEP FUSION CEILING/CART MOUNT WITH ABOVE OR BELOW SHELF SETUP 14.00...
Installation Instructions FCA820/821 ASSEMBLY AND INSTALLATION (to Cart/Ceiling) Installing to Cart/Ceiling Mount (FCA820 shown) NOTE: If installing to Wall Mount, proceed to "Installing to Wall Mount" Section. If installing to a FCA810/811 shelf, proceed to "Installing to FCA810/811 Shelves" section. Attach FCA820/821 shelf (A) to center plate (B) using two #10-32 x 1/4”...
Page 8
FCA820/821 Installation Instructions Installing to Wall Mount Place center holder (F) on top of wall mount rail. (See Figure Attach FCA820/821 shelf (A) to center plate (B) using two Tighten two screws (G) holding center holder (F) to center #10-32 x 1/4” button head cap screws (D) and two #10 plate (B).
Page 9
Installation Instructions FCA820/821 Installing to FCA810/811 Shelves (Multiple screw option - FCA821 only) Install four #4-48 x 1/4” Phillips pan machine screws (N) through outside mounting slots and into holes on bottom of camera. (See NOTE: FCA820/821 may be attached to FCA810/811 Above/ Figure 11) Below Shelves.
Page 12
Europe A Franklinstraat 14, 6003 DK Weert, Netherlands P +31 (0) 495 580 852 F +31 (0) 495 580 845 Chief, a products division of Asia Pacific A Office No. 918 on 9/F, Shatin Galleria Milestone AV Technologies 18-24 Shan Mei Street...
Need help?
Do you have a question about the Fusion FCA820 and is the answer not in the manual?
Questions and answers