Establishing Communication - Samson 3731-5 Mounting And Operating Instructions

WARNING
!
Specified degree of protection is not
achieved due to insufficient sealing of the
terminal compartment.
Only operate the positioner with sealed
cable entries and locked cover.
WARNING
!
Loss of the explosion protection due to dam-
age to the cover's thread and/or the con-
necting thread.
− Do not open devices with flameproof en-
closures when the electrical power supply
is connected.
− Observe explosion protection regulations.
5.11.2 Establishing communica-
tion
The communication structure between the
controller or automation system or between
a computer or work station and the posi-
tioner(s) is implemented to conform with
EN 61158-2.
Note
Refer to the Configuration Manual
u KH 8387-5 for more details.
Accessories for electrical connection
Î See Table 6 on page 19.
EB 8387-5 EN
Mounting and start-up
47