Removing The Precise Heat Mixing Bowl From The Stand Mixer - KitchenAid 5KSM1CB Instructions Manual

USING THE PRECISE HEAT MIXING BOWL

Removing the Precise Heat Mixing Bowl from the Stand Mixer

Be sure the Stand Mixer's speed control
1
is set to 0 and Stand Mixer and Precise
Heat Mixing Bowl are both unplugged. If
necessary, remove any accessories from
the Stand Mixer (see the "Instructions"
manual that came with your Stand Mixer
for more information).
IMPORTANT: Attachments may by hot.
Allow them to cool before removing.
For Bowl-Lift Stand Mixers: place the bowl-lift lever on the Stand Mixer in the down
2
position. Pull up on the Precise Heat Mixing Bowl to disenage the snap-lock, and lift to
remove the Precise Heat Mixing Bowl from the bowl-lift arms.
For Tilt-Head Stand Mixers: Tilt the Stand Mixer motor head back. Turn the Precise
Heat Mixing Bowl gently in a counterclockwise direction on the clamping plate to remove.
W10719711A_01_EN_v22.indd 17
17
11/20/14 9:34 AM