Removing The Precise Heat Mixing Bowl From The Stand Mixer - KitchenAid KSM1CB Instructions Manual

CMD + SHIFT CLICK TO CHANGE COPY USING THE PRECISE HEAT MIXING BOWL
Removing the Pr_ecise Heat Mixing Bowl fr_om the Stand Mixer_
Be sure the Stand Mixer's speed control
1
is OFF and Stand Mixer and Precise Heat
Mixing Bowl are both unplugged.
For Bowl-Lift Stand Mixers: place the bowl-lift lever on the Stand Mixer in the down
3
position. Pull up on the Precise Heat Mixing Bowl to disenage the snap-lock, and lift to
remove the Precise Heat Mixing Bowl from the bowl-lift arms.
For Tilt-Head Stand Mixers: Tilt the Stand Mixer motor head back. Turn the Precise Heat
Mixing Bowl gently in a counterclockwise direction on the clamping plate to remove.
Remove the stainless steel bowl liner
4
from inside the Precise Heat Mixing
Bowl base, by turning to unlock, then
lifting the liner out of the base.
14
If necessary, remove any accessories
2
from the Stand Mixer (see the
"Instructions" manual that came with
your Stand Mixer for more information).
IMPORTANT: Attachments may by hot.
Allow them to cool before removing.