Using The Ceramic Bowl; Attaching The Ceramic Bowl; Removing The Ceramic Bowl - KitchenAid 5KSMCB5N Manual

USING THE CERAMIC BOWL

Before First Use
Your Stand Mixer is individually adjusted at the factory for optimal performance. When
using the Ceramic Bowl, it may be necessary to readjust the beater-to-bowl clearance.
Ensure the thread ring is tight enough to avoid beater-to-bowl hits. When correctly
positioned, the handle and pour spout should not touch the pedestal of the Stand Mixer.
Please refer to the Stand Mixer "Instructions" manual for complete information on
adjusting the beater-to-bowl clearance.
IMPORTANT: Before use, wash with hot, soapy water, rinse and dry thoroughly. It is
not necessary to season the Ceramic Bowl before use. Do not clean in the dishwasher,
as colors may fade.
This Ceramic Bowl is designed to fit all 5KSM150/156 and 5K45SS models. Follow these
instructions to attach the Ceramic Bowl to your Stand Mixer.

Attaching the Ceramic Bowl

1. Be sure speed control is OFF (on "0")
and Stand Mixer is unplugged. Tilt the
motor head back.
2. Place the Ceramic Bowl on the clamping
plate, and attach by turning gently in a
clockwise direction.
3. Attach the appropriate accessory for
your recipe, using the directions in the
Stand Mixer "Instructions" manual. Then
place the motor head back in the down
position and lock into place.
6

Removing the Ceramic Bowl

1. Be sure speed control is OFF (on "0")
and Stand Mixer is unplugged. Tilt
the motor head back.
2. Remove the accessory from the Stand
Mixer, using the directions in the Stand
Mixer "Instructions" manual.
3. Turn the Ceramic Bowl gently in a
counterclockwise direction to remove
from the Stand Mixer clamping plate.