Helmet Hook; Tool Kit; Operator's Guide; Service Cover - Can-Am SPYDER RT Series 2020 Original Instructions Manual

5. Secure the storage compartment
by turning the center LinQ knob
1/4 turn clockwise.
219002072-401
6. Grab the storage compartment
firmly and check if it is properly
installed and locked on the vehicle.
7. Close the top storage compart-
ment cover.

Helmet Hook

Two helmet hooks are available under
the seat to secure a helmet.
Open seat.
219002072-047
Secure the helmet strap buckle on the
hook.
Gently put down helmet on the vehicle
side panel.
Carefully close the seat and latch.

Tool Kit

The tool kit is located in the front stor-
age compartment.
The tool kit contains the tools for the
basic maintenance described in this

Operator's Guide.

Operator's Guide
The operator's guide is located inside
the front storage compartment.

Service Cover

Front Service Cover
219002072-060
The front service cover must be re-
moved to reach the following items:
- Coolant reservoir
- Diagnostic connector
Removing the Front Service Cover
1. Open the front storage compart-
ment cover.
2. Pull the top middle of the service
cover to unlatch it
EQUIPMENT
43