10) Headlight Switch; 11) Turn Signal Button - Can-Am SPYDER RT Series 2020 Original Instructions Manual

SECONDARY CONTROLS
219002072-010
The BRP Connect button is used for
quick access to BRP Connect. Each
click will swap between apps view and
functions view of the multifunction
gauge.

10) Headlight Switch

The headlight switch is located in the
left top portion of the left handlebar
housing.
219002072-011
The following icon appears inside the
digital display when the headlight are
turn on.
Headlight
icons
The switch is used to select high or low
beam for the headlight. The headlights
automatically turn on when the engine
reaches 800 RPM and turn off after ap-
proximately 20 seconds when engine
has been stopped.
26
To select high beams, push the switch
to the front position.
beams, push the switch to the back
position.
To flash the high beams, press the
switch to the down position, then re-
lease it. The high beams will stay on
as long as you hold down the switch.
1
2
3
219002072-009
1. High beams
2. Low beams
3. Flash high beams

11) Turn Signal Button

The turn signal button is located on the
center of the left handlebar housing.
219002072-012
The following icon appears inside the
digital display when the turn signal is
activated.
Left turn signal icon
Right turn signal icon
To select low