Turn Ignition Key To The On Position - Can-Am SPYDER RT Series 2020 Original Instructions Manual

Turn Ignition Key to the ON
Position:
Item
Multifunction
gauge
Lights
Horn
Steering
Engine stop
switch
Parking brake
Brake
Safety Card
Check the gauges, indicators, messages and the fuel
level
Check operation of headlights, taillight, brake light,
turn signals and hazard warning lights.
Check operation.
Start engine and verify that steering operates freely.
Check that the engine stop switch is working properly.
Start engine, release parking brake and ensure brake
indicator lamp is off on the multifunction gauge.
Drive a short distance forward slowly then apply
brake to test.
Reinstall the glove box and close its cover after view-
ing the safety card.
Procedure
107