Brake Pedal; Parking Brake Button - Can-Am SPYDER RT Series 2020 Original Instructions Manual

PRIMARY CONTROLS
219002072-201
1. Upshift
2. Downshift
This shifts sequentially from one gear
to the next. Release the selector after
shifting.
- To shift through multiple gears, use
the selector multiple times.
- To shift into neutral from first gear
or reverse, briefly press or pull the
gear selector. A longer activation
will shift over neutral.
- To shift out of reverse into 1st gear,
press the brake pedal and shift up.
- To shift from neutral to first gear,
press the brake pedal and shift up.
When the gearshift selector is released,
the mechanism resets for the next shift
UP or DOWN.
If operator does not downshift when
slowing down and engine RPM drops
below a threshold value, the gearbox
will automatically downshift to the next
available gear.
If the engine is started with gearbox in
gear, it will automatically shift to neutral
position.
16

4) Brake Pedal

The brake pedal is located on the right
floorboard.
Press the pedal with your foot to apply
the brake to all three wheels.
NOTICE When riding, make sure not
to lay your foot on brake pedal. Oth-
erwise, the engine management will
activate the limp home mode to protect
the braking system.
219002072-103
1. Brake pedal
2. Floorboard

5) Parking Brake Button

The parking brake button is located on
the left handlebar housing. It allows to
engage or release the electric parking
brake.
There will be a 20 second beep sound
when stopping the engine while the
parking brake is not engaged.
219002072-203
1
2