Operator Seat; Passenger Seat - Can-Am SPYDER RT Series 2020 Original Instructions Manual

EQUIPMENT

Operator Seat

The operator seat includes a location
to install a backrest (available in acces-
sory).
219002072-048
Opening the Seat
1. Insert key in ignition switch.
2. Push and turn the key 1/4 turn
clockwise to the seat opening posi-
tion and hold while lifting seat.
219002072-208
KEY POSITION TO OPEN SEAT
1. Push key
2. Turn key 1/4 turn
NOTICE Do not force the seat past
the maximum opening angle or it may
break.
40

Passenger Seat

219002072-075
Removing the Seat
1. Open the operator's seat.
2. Unlatch seat. One latch on each
side.
219002072-076
RIGHT PASSENGER' SEAT LATCH SHOWN
3. Pull seat forwards to releaase the
rear tabs.
4. Lift the seat slightly and unplug the
heat seat connector.
Installing the Seat
1. Plug the heat seat connector.
2. Insert the rear tabs into the sup-
port openings.
3. Push on the front of the seat to
latch it.
4. Close the operator's seat.