Before Starting The Vehicle, Inspect The Following - Can-Am SPYDER RT Series 2020 Original Instructions Manual

Before Starting the Vehicle,
Inspect the Following:
Item
Tires
Wheels and
lug nuts
Drive belt
Leaks
Storage com-
partment cov-
ers and glove
box
ACS rear
suspension
(Base Mod-
els)
Seats
Mirrors
Brake pedal
Throttle han-
dle
Gearshift se-
lector
Weight
Look for damage. Inspect inflation and tread wear.
Refer to
MAINTENANCE PROCEDURES
Look for damage. Twist each front wheel lug nut by
hand to be sure it is not loose. Be sure the rear wheel
axle nut is in place.
Look for fraying, cuts, punctures and missing teeth.
Verify alignment. For additional information, refer to
MAINTENANCE PROCEDURES
Look under the vehicle for any leaks.
Check that they are properly latched.
Verify inflation. Refer to BASIC PROCEDURES
Ensure seats are properly latched.
Clean and adjust: (see
Press and make sure you feel firm resistance. Pedal
must fully return when released.
Twist several times. Be sure it operates freely and
returns to idle position when released.
Be sure gearshift selector operates normally in both
directions and returns to center when released.
Ensure that total load on the vehicle (including op-
erator, passenger, cargo and added accessories)
does not exceed recommended load as indicate in
the
TECHNICAL SPECIFICATIONS
Procedure
.
in
MIRRORS EQUIPMENT
section.
.
105