Toshiba B-SX6T Series Owner's Manual page 26

2. PRINTER SETUP
2.4 Loading the Media
(Cont.)
WARNING!
The cutter is sharp, so care
must be taken not to injure
your fingers when handling the
cutter.
CAUTION!
1. When using a label stock, be
sure to cut the gaps. Cutting
labels will cause the glue to
stick to the cutter, which may
affect the cutter quality and
shorten the cutter life.
2. Use of tag paper which
thickness exceeds specified
value may affect the cutter
life. For the specification of
the media, refer to Section
7.1 Media.
Cut mode (Option)
When the optional Cutter Module is fitted, the media is automatically cut.
(1) Insert the leading edge of the media into the Media Outlet of the
Cutter Module.
Cutter module
(2) Turn the Pinch Roller Lever counterclockwise to lock the Pinch
Roller.
(3) Close the Top Cover and Right Side Cover.
E2-12
ENGLISH VERSION EO1-33056
2.4 Loading the Media
Pinch Roller Lever
Top Cover
Right Side Cover