Toshiba B-SX6T Series Owner's Manual page 122

APPENDIX 1 MESSAGES AND LEDS
LCD Message
No.
SYSTEM ERROR
21
100BASE LAN
22
INITIALIZING...
DHCP CLIENT
23
INITIALIZING...
24 LOW BATTERY
RFID WRITE ERROR
25
RFID ERROR
26
NOTE: When an error message listed above appears on the LCD message display, please refer to Section 5
TROUBLESHOOTING for solution.
LED Indication
ON
POWER ERROR
LINE
When the following abnormal operations
are performed, a system error occurs:
(a) Command fetch from an odd address
(b) Access to word data at an odd address
(c) Access to long-word data at an odd
address
(d) Access to the area of 80000000H to
FFFFFFFFH in the logic space in
user mode.
(e) An undefined instruction in an area
other than a delay slot was decoded.
(f) An undefined instruction in a delay
slot was decoded.
(g) An instruction to rewrite a delay slot
was decoded.
100 Base LAN Board is being initialised.
The DHCP client is being initialized.
*When the DHCP function is enabled.
The voltage of the Real Time Clock
Battery is 1.9V or less.
The printer did not succeed in writing data
onto an RFID tag after having retried for a
specified times.
The printer cannot communicate with the
RFID module.
EA1- 2
APPENDIX 1 MESSAGES AND LEDS
Printer Status
ENGLISH VERSION EO1-33056
Acceptance of
Restoration by
Status Request
RESTART key
Reset Command
(Yes/No)
(Yes/No)
No No
----- -----
----- -----
No Yes
Yes Yes
Yes Yes