2. PRINTER SETUP
2.4 Loading the Media
(Cont.)
WARNING!
When the Backing Paper
Release Bar is released, it is
automatically closed by the
spring. Care must be taken
not to pinch your fingers or
hands.
Strip mode (Option)
When the optional Strip Module is fitted, a label is automatically
removed from the backing paper at the Strip Plate as each label is printed.
(1) Pull out the backing paper past the Media Outlet.
Backing Paper
Strip module
(2) While holding down the Backing Paper Release Bar, and pass the
backing paper between the Backing Paper Holder and the Strip Roller.
Then, release the Backing Paper Release Bar.
Backing Paper
Backing Paper Release Bar
(3) Turn the Pinch Roller Lever counterclockwise to lock the Pinch
Roller.
(4) Close the Top Cover and Right Side Cover.
E2-11
ENGLISH VERSION EO1-33056
2.4 Loading the Media
Media Outlet
Strip Roller
Backing Paper Holder
Pinch Roller Lever
Top Cover
Right Side Cover