Advertisement
Section
5
POOL MAINTENANCE
Keep your pool wall and frame clean. Always wash away any deposits of pool chemicals which land on the frame of your pool.
Wash periodically with a mild soap solution (no abrasives). At least once a year use a clear non-yellowing household wax on all
metal components.
Your pool and liner must be inspected regularly for leaks, corrosion, scratches, and punctures. If any problem is found
CORRECTIVE ACTION MUST BE TAKEN
available at your local dealer. Scratches on your pool wall & frame must be touched up with anti-rust enamel. Wire brush all rust
and add a coat of enamel primer followed by a coat of color matching paint. Pool water is full of various caustic chemicals, which
will corrode metal parts. If any corrosion is allowed to continue, failure of the pool structure may occur which could result in
excessive property damage as well as bodily harm.
The skimmer & return area and below it are particular areas that must be carefully and regularly inspected. If this area is wet,
and remains wet for any length of time, it usually means there is a small leak. Skimmer/skimmer return gaskets must be replaced
when they become defective. Water must not be permitted to continually run down the wall, if neglected pool will break. If proper
skimmer/skimmer return gasket care is not maintained, your warranty will be void!
Important Note:
Be sure to follow all local and state safety regulations when installing any accessory to your pool. Any decks, and
all entries, must be carefully monitored for safety and access to pool. Installing any other manufacturer's deck or
slide is strictly forbidden!
POOL MAINTENANCE
. Small repairs and punctures in your liner may be easily repaired using repair kits
No Diving or Jumping. Observe all Safety Rules
Page 56
IMMEDIATE
Section 5
Advertisement
