Table of Contents
Advertisement
Offramp Gateway
The offramp gateway function allows for E-mail or Internet Fax sent from another device to be converted into standard fax
data via this equipment, which will be sent to the recipient specified by the sender via a public telephone line. This is useful
in reducing communication costs by using a combination of both the Internet and public telephone lines. For example,
when sending documents long distances, such as overseas, the Internet can be used to send the document to a machine
in the country of destination and then it will be forwarded to a target fax machine as fax data via a public telephone line.
To use this function, the scanning function is required.
The e-STUDIO455 Series and the e-STUDIO855 Series provide the scanning function as an option. However, this optional function
is already installed in some models.
1. The domain name of this equipment
and the fax number of the final
recipient are specified and an Internet
Fax is sent.
Internet Fax
machine
Client Computer
1. The domain name of this equipment
and the fax number of the final
recipient are specified and an E-mail
is sent.
Specifying an E-mail address
When you want to use this equipment as a relay station to perform an offramp gateway transmission, ask the sender to
specify an E-mail address as follows.
FAX=xxxxxxxx@FQDN
The fax number of the final recipient is specified in "xxxxxxxx".
e.g.: In case that the fax number is "1234567890" and the domain name of this equipment (FQDN) is
"host1.toshibatec-ifax.com", the fax should be sent to
FAX=1234567890@host1.toshibatec-ifax.com
Sending to a subaddress
FAX=xxxxxxxx/T33S=yyyy@FQDN
The fax number of the final recipient is specified in "xxxxxxxx" and the subaddress in "yyyy".
e.g.: In case that the fax number is "1234567890", the subaddress is "1234", and the domain name of this equipment
(FQDN) is "host1.toshibatec-ifax.com", the fax should be sent to
FAX=1234567890/T33S=1234@host1.toshibatec-ifax.com
Setting up the SMTP server
SMTP is a server protocol for sending and receiving E-mails. To use the offramp gateway function, you need to set up the
SMTP server so that this equipment can receive E-mails and Internet Fax using SMTP. For details of the operation, refer
to the TopAccess Guide.
2. The E-mail and the Internet
Fax in which the domain name
of this equipment is specified
are received, and are sent to
Mail Server
this equipment.
Internet
Intranet
Subaddress
Destination
Mail Server
4. If a subaddress is specified in the recipient of the
received fax, the fax is sent to the subaddress
destination.
4 ADVANCED FUNCTIONS
3. The received E-mail and the Internet
Fax are converted to the standard
fax, and are sent to the final
recipient's fax machine.
e-STUDIO
Mail Server
(SMTP)
G3 Fax machine
Offramp Gateway
79
Advertisement
Table of Contents
