Table of Contents
Advertisement
2 SENDING/RECEIVING A FAX
Sending a Fax
Basic procedures
This section describes the basic procedures to send a fax. For details of in-depth operations, see the page under each
procedure as required.
Besides the basic sending functions described in this page, there are various useful ways to send a fax. These procedures
are described in the following pages.
P.38 "Other transmissions"
P.53 "ADVANCED FUNCTIONS"
1
Place the original(s).
Check the original size and scanning range, etc. Place the original(s) on the original glass or RADF (Reversing
Automatic Document Feeder) in the correct direction. (The illustration above shows the original placed on the
original glass.)
P.23 "Handling an original"
2
Press the [FAX] button on the control panel.
The fax screen is displayed. If you leave the screen unattended for the period of the auto clear setting time (45 sec
by manufacture default), the screen returns to the default one automatically.
3
Press [OPTION] and set the transmission conditions.
The transmission condition setting screen is displayed. Set the transmission conditions such as resolution, original
mode, exposure and transmission mode, as required.
P.27 "Setting the transmission conditions"
20
Sending a Fax
Advertisement
Table of Contents
