Table of Contents
Advertisement
2 SENDING/RECEIVING A FAX
Placing the original(s) on the original glass
This section describes how to set an original on the original glass. Originals are sent in the order they are placed on the
original glass.
Do not place any heavy objects (4 kg/9 lb. or over) on the original glass and do not press on it with force.
Breaking the glass could injure you.
1
Raise the Original Cover or RADF (Reversing Automatic Document Feeder), and place
the original with its face down on the glass.
Raise it 60 degrees or more for the detection of the original.
2
Align the original against the left inner corner of the glass.
Different size originals can also be sent in one transmission.
When an original of any size other than LT/A4 is placed in the direction shown in the above left figure,
transmission to a recipient is carried out so that the pre-entered sender information is printed in position A in the
figure.
When an original of LT/A4 size is placed in the direction shown in the above right figure, transmission to a
recipient is carried out so that the pre-entered sender information is printed in position B in the figure.
The pre-entered sender information shows what is registered in the Terminal ID.
P.103 "Registering the terminal ID"
3
Lower the Original Cover or RADF slowly.
24
Sending a Fax
A
B
Advertisement
Table of Contents
