Table of Contents
Advertisement
6 SETTING ITEMS
Setting recovery transmission
You can set a period of time to retain original data in the memory for the recovery transmission function, or whether
enabling or disabling this function.
1
Press [RECOVERY TX].
2
Press [
24H] or [
When the screen is returned to the one shown in step 1 above, make sure that an orange line is marked on
[RECOVERY TX]. This line indicates that the recovery transmission function is ON. If you press [RECOVERY
TX] again, the orange line disappears, that is, the function is OFF.
108
Administrator Settings
1H] to set the document-stored time, and then press [OK].
Advertisement
Table of Contents
