Toshiba GD-1250 Operator's Manual page 30

2 SENDING/RECEIVING A FAX
RESOLUTION
Set the resolution based on the fineness of the original.
STANDARD: This is suitable for an original with regular size text.
FINE: This is suitable for an original with small size text and fine illustrations.
U-FINE: This is suitable for an original with ultra-fine illustrations.
If the recipient's fax machine is not capable of receiving originals at the same resolution, the resolution is automatically
converted before being sent to the recipient. The higher the resolution is, the longer it takes to send an original.
ORIGINAL MODE
Set the scanning mode based on the type of the original.
TEXT: This is suitable for an original with text and line drawings.
TEXT/PHOTO: This is suitable for an original with a mixture of text and photos.
PHOTO: This is suitable for an original with photos.
In the TEXT/PHOTO mode or PHOTO mode, transmission time may be longer than that in the TEXT mode.
TX TYPE
Set the fax transmission mode.
MEMORY TX: Send the original after the scanned data are saved in the memory. Up to 100 transmissions can be
reserved. Up to 1000 pages can be sent in one transmission.
DIRECT TX: Send the original directly as it is being scanned. Once a page has been scanned and sent, the next
page is scanned and sent. Therefore, it takes longer to scan and send all pages. However, you can
confirm on the fly that each page is sent to the recipient.
EXPOSURE
Set the density at which the original is to be scanned.
AUTO: This equipment automatically detects the contrast of the original, and scans it with the optimum density.
Manual:
Press
ORIGINAL SIZE
Set the scan size of the original.
AUTO:
DIFFERENT WIDTH:
Specified size:
If the recipient's fax machine is not capable of receiving originals of B5/B5-R size, this equipment may reduce that size
before sending it. To avoid this, when the original to be set is B5 and B5-R size, specify A4 and A4-R size respectively.
28 Sending a Fax
or to set the desired contrast.
The size of the original is automatically determined before the original is scanned.
Select this function to load the originals with different width into the RADF (Reversing
Automatic Document Feeder).
The original is scanned at the preset size regardless of its actual size.