Table of Contents
Advertisement
6 SETTING ITEMS
Setting RX printing
You can set up options to print a received fax.
In the Administrator's Function List, you can view the status of the options. For details of the operation to print the list,
refer to the MFP Management Guide.
1
Press [RX PRINT].
2
Set each option, and then press [OK].
DISCARD
You can switch discard printing ON or OFF. With it being set to ON, if an original is up to 10 mm (0.4 inch) longer
than the printing area, the part that exceeds the paper printing area is discarded.
P.42 "Default setting for RX printing"
REDUCTION
You can switch RX reduction printing ON or OFF. With it being set to ON, if an original exceeds the printing area by
more than 10 mm (0.4 inch), it is reduced by 90% of the original size when printing.
P.42 "Default setting for RX printing"
106
Administrator Settings
Advertisement
Table of Contents
