Table of Contents
Advertisement
4 ADVANCED FUNCTIONS
Onramp Gateway
The onramp gateway function allows for an original sent from another mailbox-supported fax machine to be converted into
E-mail data, which will be sent to a pre-registered E-mail address, via the mailbox (relay station) in this equipment.
To use this function, the scanning function is required.
The e-STUDIO455 Series and the e-STUDIO855 Series provide the scanning function as an option. However, this optional function
is already installed in some models.
ITU-T Compatible
G3 Fax machine
2. The fax is converted to an E-mail
Fax numbers and E-mail addresses can be registered to the mailbox used for an onramp gateway transmission. That
mailbox is the same as the one used for the mailbox transmission. For details of how to create/modify/delete a relay
station mailbox, see the following section.
P.68 "Creating/modifying/deleting a mailbox"
To use the onramp gateway, you need to set an E-mail address and Internet Fax to this equipment. For details of the
operation, refer to the TopAccess Guide.
78
Onramp Gateway
1. A fax is sent to the Relay Box
of the equipment through the
public telephone line.
e-STUDIO
Relay Box
and sent to the E-mail address
registered in the Relay Box.
Mail Server
Internet
Intranet
Mail Server
Internet Fax
machine
3. The E-mail (Internet Fax) is received
through the Network.
Mail Server
Client Computer
3. The E-mail is received through the
Network.
Advertisement
Table of Contents
