Setup Flow For Onramp Gateway - Toshiba e-studio 350 Quick Start Manual

Setup Flow for Onramp Gateway

To enable the Onramp Gateway feature, the optional Fax unit must be installed.
This equipment can convert received faxes into E-mails and forward them to other Internet Fax devices or
client computers using Onramp Gateway transmission.
This equipment can create the ITU-T relay mailbox in which E-mail addresses are registered as end stations
to achieve the Onramp Gateway transmission. Any ITU-T compatible facsimile can send a fax to the ITU-
T relay mailbox. This equipment then forwards received faxes to the E-mail addresses registered in the ITU-
T relay mailbox.
To use this equipment as a Hub Station for the Onramp Gateway transmission, the Relay Box in which E-
mail addresses are registered must be set up. This equipment, as the distributor, can send an E-mail of any
faxes received from any ITU-T compatible facsimile device.
ITU-T compatible
G3 Facsimile
Internet
The Internet Fax device receives the document
from the Internet as an Internet Fax document.
The client computer receives the document
from the Internet as an E-mail document.
Setup Flow
Connect this
equipment
Onramp Gateway
Sending a fax to the Relay Box of
the equipment through the
Public Switched Telephone network
SMTP Server
Connect the machine to your network with a network cable.
Reference: QUICK START GUIDE
- Chapter 4 "CONNECTING TO THE DEVICE"
"3. CONNECTING TO THE NETWORK""
Send a document as
Internet Fax to the Internet
via SMTP server
Internet Fax Device
Client Computers
Description/Reference
ITU-T
Relay Box
E-mail addresses
are assigned
to the end station
in the Relay Box
5
59