Sending A Fax; Basic Procedures - Toshiba GD-1320 Operator's Manual

2 SENDING/RECEIVING A FAX

Sending a Fax

 Basic procedures
This section describes the basic procedures to send a fax. For details of in-depth operations, see the page
under each procedure as required.
Besides the basic sending functions described in this page, there are various useful ways to send a fax.
These procedures are described in the following pages.
 P.41 "Other transmissions"
 P.57 "ADVANCED FUNCTIONS"
1
Place the original(s).
Check the original size and scanning range, etc. Place the original(s) on the original glass or RADF
(Reversing Automatic Document Feeder) in the correct direction. (The illustration above shows the
original placed on the original glass.)
 P.24 "Handling an original"
2
Press the [FAX] button on the control panel.
The fax screen is displayed. If you leave the screen unattended for the period of the auto clear setting
time (45 sec. by manufacturer default), the screen returns to the default one automatically.
3
Press [OPTION] and set the transmission conditions.
The transmission condition setting screen is displayed. Set the transmission conditions such as
resolution, original mode, exposure and transmission mode, as required.
 P.29 "Setting the transmission conditions"
20

Sending a Fax