Toshiba 120/150 Operator's Manual page 62

8
Begin installation of the Desktop Document Manager (This step will start if it was selected in
step 4).
1. After confirming the message in the "Welcome to Desktop Document Manager installation" window,
click the "Next" button.
2. Read the message in the "Information" window, and then click the "Next" button.
3. When the "Choose Destination Location" window appears, click the "Next" button.
4. When the "Select Program Folder" window appears, click the "Next" button.
• The setup program will start to copy the files.
• If the dialog box asking "This program is about to install
Desktop Document Manager imaging, which does not
support LZW compression." appears, answer the question
to continue the Desktop Document Manager installation.
5. Click the "Finish" button when the message to inform you of the completion of the installation
appears.
9 Click the "Close" button when the message to inform
you of the completion of the installation appears. When
the "Now connect the MFP interface cable to the PC."
dialog box or "After Windows system restart..." dialog
box appears, click the "OK" button.
After the installation, a message to restart your
computer may be displayed. In this case, click the
"Yes" button to restart your computer.
10 Connect the USB interface cable. (See p. 7-29)
Windows will detect the MFP and the Plug and Play screen will appear.
11
Follow the instructions in the Plug and Play screen that appears in your version of
Windows to begin the installation.
You have completed the installation of the software.
7-11