Table of Contents
Advertisement
The present User's manual contains the technical details, operating instructions and technical specification for the unit.
The unit is an energy saving device based on energy recovery technology and is one of the energy saving components used in the buildings
and premises.
The unit is a component part and is not designed for stand-alone operation.
The unit is designed to ensure continuous mechanical air exchange in houses, offices, hotels, cafés, conference halls and other utility and
public spaces as well as to recover the heat energy contained in the air extracted from the premises to warm up the filtered stream of supply air.
The units are designed for wall mounting.
The unit is rated for continuous operation.
Transported air must not contain any flammable or explosive mixtures, evaporation of chemicals, sticky substances, fibrous materials,
coarse dust, soot and oil particles or environments favourable for the formation of hazardous substances (toxic substances, dust, pathogenic
germs).
THE UNIT MAY NOT BE OPERATED BY CHILDREN OR PERSONS WITH REDUCED PHYSICAL, MENTAL
OR SENSORY CAPACITIES, OR LACKING THE APPROPRIATE TRAINING.
THE UNIT MUST BE INSTALLED AND CONNECTED ONLY BY PROPERLY QUALIFIED PERSONNEL AFTER
THE APPROPRIATE BRIEFING.
THE CHOICE OF UNIT INSTALLATION LOCATION MUST PREVENT UNAUTHORIZED ACCESS BY
UNATTENDED CHILDREN.
Air handling unit
Fastening kit
Cardboard template
User's manual
Packing box
Name
MICRA 80 AX
INTRODUCTION
Number
1 item
1 item
1 item
1 item
1 item
DESIGNATION KEY
Unit control panel
3 - P3-1-300 control panel
4 - SP3-1 control panel
Air capacity [m
/h]
3
Unit name
PURPOSE
DELIVERY SET
5
Advertisement
Table of Contents
