HIKVISION DS-2CE10HFT-F User Manual page 13

NOTE: Drill a cable hole when using a ceiling outlet to
route the cable.
Take apart the junction box, and align the mounting
base screw holes with those on the junction box
cover.
Install the mounting base to the junction box cover
with three PM4 screws.
Figure 21, Secure Junction Box Cover Screws
Secure the junction box's body on the wall with four
PA4 × 25 screws.
Route the cables through the junction box's bottom
or side cable hole.
Attach the junction box cover to its body.
Repeat steps 7 to 9 of
without Junction Box
UM ColorVu DS-2CExxHFT-Fxx 122919NA
Figure 20, Drill Template
Figure 22, Secure Junction Box Body
2.3.1 Ceiling/Wall Mounting
to finish the installation.
13