Assembly Step 2: Mounting The Legs - Weston 41-0701-W Manual

ASSEMBLY STEP 2: MOUNTING THE LEGS

LOCATE THESE PARTS
4 LEGS
HARDWARE
1. Leave the Cabinet positioned upside down.
2. Line up the back Legs with the mounting
holes. FIGURE 3 Insert the 3 Bolts into each
leg (the nuts are pre-welded to the Cabinet).
3. Tighten the back Leg Bolts securely.
2. Line up the front Legs with the mounting
holes. Insert 2 Bolts (the nuts are pre-welded
to the Cabinet) leaving the third mounting hole
without a Bolt. REPRESENTED BY AN "X" IN
FIGURE 4
4. DO NOT tighten the Bolts on the front Legs.
Leave them loose enough so that the front Legs
can move easily.
x
HARDWARE BAG
NOTE: Hardware Bag
A includes 12 Bolts.
You will need 10 bolts
for this step. The re-
maining 2 bolts will be
used for the next step.
LEGS
Leave these
Bolts loose for
the next step.
FIGURE 4
CABINET
ASSEMBLY
TOOLS NEEDED
PHILLIPS
HEAD
SCREWDRIVER
A
TOP
FIGURE 3
Leave
these
Bolts
loose for
the next
step.
7