Assembly Step 6: Securing The Handles; Assembly Step 7: Wood Chip Box Installation - Weston 41-0701-W Manual

ASSEMBLY STEP 6: SECURING THE HANDLES

LOCATE THESE PARTS
LOCATE THESE PARTS
2 CARRY
HANDLES
HARDWARE
HARDWARE
8 NUTS
1. Line up the Carry Handle with the corresponding
holes on the side of the Cabinet. The Handles must be
positioned upright with the bolt holes on the bottom.
2. Insert the Bolts from the outside and thread the Lock
Washers and Nuts from the inside of the Cabinet. Firmly
tighten the Nuts. Figure 12
3.Complete steps for both sides of the Cabinet Assembly
and Carry Handles.

ASSEMBLY STEP 7: WOOD CHIP BOX INSTALLATION

LOCATE THESE PARTS
WOOD CHIP BOX
& WOOD CHIP LID
1. Position the Wood Chip Box Stand on top of
the Burner Chamber, resting in the two notches
of the Stand.
2. Set the Wood Chip Box on top of the Wood
Chip Box Stand.
3. Place the Wood Chip Box Lid on top of the
Wood Chip Box. FIGURE 13
10
HARDWARE BAG
8 LOCK WASHERS
WOOD CHIP BOX
TOOLS NEEDED
TOOLS NEEDED
C
8 BOLTS
NUTS
LOCK
WASHERS
CABINET
ASSEMBLY
STAND
WOOD CHIP BOX
& WOOD CHIP LID
WOOD CHIP
BOX STAND
BURNER
CHAMBER
PHILLIPS
HEAD
SCREWDRIVER
1/2" WRENCH
CARRY
BOLTS
HANDLES
FIGURE 12
FIGURE 13