Assembly Step 8: Water Bowl Installation; Assembly Step 9: Handle Installation - Weston 41-0701-W Manual

ASSEMBLY STEP 8: WATER BOWL INSTALLATION

LOCATE THESE PARTS
WATER
BOWL
1. Slide the Water Bowl into the lowest Rack position. FIGURE 14
2. Insert the Cooking Racks into the remaining Rack positions as
desired; however, do not insert a Grid directly over the Water Bowl -
the Water Bowl will restrict heat distribution. For best results, the Rack
wires should run front to back.
3.Re-mount the Door Panel by sliding the Door's hinge pins into the
Cabinet's hinge seats. FIGURE 14

ASSEMBLY STEP 9: HANDLE INSTALLATION

HARDWARE & PARTS
DOOR
HANDLE
Includes Spring & Washer
1. Slide the washer onto the end of the Door Handle, followed by the
Spring. FIGURE 15
2. Feed the Door Handle into the hole through the front of the Door Panel.
FIGURE 16
3. From the back side of the Door Panel, insert the Mounting Plate over
the end of the Door Handle. FIGURE 16
4. With Lock Washers placed on the Bolts, insert the Bolts through the
Mounting Plate, into the pre-threaded mounts and firmly tighten the
Bolts.
Repeat steps 1-4 for the 48" Smoker, as it will
have 2 Handles to install.
COOKING
RACKS
30" MODEL HAS 3 RACKS
36" MODEL HAS 4 RACKS
48" MODEL HAS 6 RACKS
D
TOOLS NEEDED
PHILLIPS
HEAD
SCREWDRIVER
COOKING
CABINET
RACKS
Door
WATER
BOWL
DOOR
HANDLE
DOOR
PANEL
FIGURE 14
FIGURE 15
FIGURE 16
11