Operating The Console; Using The Osd Menus And Submenus - Vertiv KMMLED156 Installer/User Manual

3 OPERATING THE CONSOLE

The flat-panel On-Screen Display (OSD) is configured using the icons on the upper right corner of your keyboard. These
navigation icons are defined in the following table.
Figure 3.1 OSD Menu
Table 3.2 Keyboard Icon Functions to Navigate and Configure the OSD
ICON

3.1 Using the OSD Menus and Submenus

The following is an example procedure. If you change the settings and then proceed to another menu or exit the OSD menu,
the changes are automatically saved.
Vertiv | KMMLED156 Rack Mount 15.6" Console Tray for Dell EMC Installer/User Guide |
NAME FUNCTION
Illuminated: On
Power/LED (Status) Not Illuminated: Off
Blink: No video signal detected
MENU Displays/enables the menus, submenus and configuration categories.
Exits from the submenus; also, when the OSD is not activated by the Menu icon, this icon displays
SELECT
source options to select, followed by tapping the Menu icon to change the selection.
Cycles up through the four or five tab options; the Menu icon must be tapped to select a submenu
UP
function.
Cycles down through the four or five tab options; the Menu icon must be tapped to select a
DOWN
submenu function.
* No on-screen display window.
13