Connecting The Kmmled156 Assembly - Vertiv KMMLED156 Installer/User Manual

Table 2.7 Cable Management Arm Descriptions
ITEM DESCRIPTION
1 Slide rail assembly
2 CMA attachment flange
3 CMA latch (with thumbscrew)
Figure 2.8 Securing the Cables to the Rear Bracket

2.4 Connecting the KMMLED156 Assembly

After the KMMLED156 assembly is installed in the slide rails, you can connect the target and power cables to the console.
To connect the KMMLED156 assembly:
1. Connect the video and USB connectors to the target device.
2. Connect the power cord to a properly grounded electrical outlet or power distribution unit (PDU).
3. (Optional) Bundle excess cables into a figure-eight loop and secure with a cable strap.
NOTE: Do not coil the cables. To minimize electrical interference from the video cable, arrange the cable in figure-
eight loops.
Vertiv | KMMLED156 Rack Mount 15.6" Console Tray for Dell EMC Installer/User Guide | 10