Securing The Cable Management Arm (Cma) - Vertiv KMMLED156 Installer/User Manual

Table 2.6 KMMLED156 Console Tray Assembly Installation
ITEM DESCRIPTION
1 Inner slide rail
2 Outer slide rail

2.3 Securing the Cable Management Arm (CMA)

After the slide tray is mounted in the rack, you can secure the Cable Management Arm to the slide rail assembly bracket.
To secure the CMA and cables to the slide rail assembly bracket:
1. Slide the CMA latch over the CMA attachment flange.
2. Secure the CMA latch to the CMA attachment flange with the thumbscrew.
NOTE: In tightly-spaced racks, a Phillips® head screwdriver can be used to tighten the thumbscrew.
3. Gently thread the cables through the cable channel on the CMA and use a zip tie to secure the cables to the
rear bracket.
Figure 2.7 Securing the CMA
Vertiv | KMMLED156 Rack Mount 15.6" Console Tray for Dell EMC Installer/User Guide | 9