Receiving An External Call During An Internal Call; Activate/Deactivate Handsfree Function - Topcom BUTLER 2410 C User Manual

Butler 2410C
• The telephone number of the caller appears on the display if you have Caller ID service (CLIP).
Consult your telephone company. The name of the caller also appears on the display if:
- the name is programmed into the Phone Book
- the network sends the name together with the telephone number
(FSK CID system only).
• Press the Line key
• During the call 'EXT' and the symbol
• After finishing your call, press the Line key
base unit.
4.5.2 Receiving an internal call
This function only works if multiple handsets are subscribed to the base unit!
• The handset rings.
• 'INT' and the number of the handset you are trying to reach, appear on the display. The Call
symbol blinks on the display.
• Press the Line key
• During the call, 'INT', the handset number of the caller and the symbol
display. The call timer starts running.
• After finishing your call, press the Line key
base unit.

4.5.3 Receiving an external call during an internal call

If you receive an external call during an internal call, you will hear a call waiting tone (double
beep) on both handsets being used for an internal call.
• Press the Line key
• After finishing your call, press the Line key
base unit.

4.6 Activate/deactivate handsfree function

This function allows you to communicate without having to pick up the handset. When you are
on the phone, press the Up/Handsfree key
Press the same button to deactivate the handsfree function.
Note : When you are calling in handsfree mode and you want to change the volume, press the Volume
button .
Attention !! When you use the handsfree function for a long time, the batteries will be empty quickly !
4.6 Headset connection (only on the Butler 2410)
You can connect a headset with a 3 pole jack plug of 2,5mm on the right side of the handset.
When the headset is connected, you can only hear and talk through the headset. The headset
microphone can still be muted by the Mute key. The handsfree speaker can still be activated by
pressing the handsfree key
to accept the external call.
appear on the display. The call timer starts running.
to accept the internal call.
twice to accept the external call.
/
.
10 10 10 10 10 10 10 10 10 10 10
to hang up or put the handset back on the
to hang up or put the handset back on the
to hang up or put the handset back on the
(for Butler 2410 only)
to activate the handsfree function.
appear on the