Extron electronics SENTOSAxi User Manual page 15

im Vertrieb von
Installation and Operation
#2 – SERR REM (Serration Pulse Removal)
#3 – SPLIT SCR (Sentosaxi = Tri-screen, Lanciaxi = split screen)
#4 – STILL (STILL Mode)
#5 – VGA (VGA Mode) Lanciaxi only, SPARE on Sentosaxi
#6 – H+ (Horizontal Sync Polarity Positive)
#7 – V+ (Vertical Sync Polarity Positive)
#8 – X MODE (Executive Mode)
www.camboard.de
Extron • SENTOSA xi LQ & LANCIA xi LD • User's Manual
CAMBOARD Electronics
Disabled – Serration pulses are passed along with the
vertical sync pulse.
Enabled – Serration pulses are removed from the output
vertical sync pulse.
Disabled – Split screen is disabled.
Enabled – Split screen (Demo Mode) displays the selected
input interlaced video on the left side of the
screen. The remainder of the screen depends on
the model.
• Sentosaxi displays line quadrupled video in the
center of the screen and line doubled video on
the right side of the screen.
• Lanciaxi displays line doubled video on the
right half of the screen.
Disabled – Motion Compensation Mode – optimizes motion
video such as from VCRs, DVDs, Tuners, etc.
Enabled – Motionless video, such as text, will have
enhanced resolution for easier reading.
Disabled – The output will have twice the number of input
horizontal lines per screen scan. For NTSC, the
number of horizontal lines per screen scan,
normally 262.5, will double to 525. For the PAL
system, the number of horizontal lines per screen
scan, normally 312.5, will double to 625 lines.
(This description assumes that SW#3, Split
Screen, is disabled).
Enabled – Active vertical resolution becomes 480 non-
interlaced horizontal lines, regardless of the input.
Disabled – The horizontal sync polarity will be negative.
Enabled – The horizontal sync polarity will be positive.
Disabled – The vertical sync polarity will be negative.
Enabled – The vertical sync polarity will be positive.
Disabled – All front panel operations are enabled.
Enabled – Front panel picture controls (Color, Tint, Contrast
and H Shift) are locked out. MIN and MAX LEDs
are on together to indicate that Executive Mode is
enabled.
Tel. 07131 911201
Fax 07131 911203
ce-info@camboard.de
Page 2-4