Paging; Flash Button (R); Setting The Ring Volume And Melody; Key Lock - Topcom BUTLER 4800 User Manual

Topcom Butler 4800Twin/Triple/Quattro
5.8

Paging

When you press the Paging button
20 seconds. This signal helps you find a lost handset. Press any key to stop the ringing on a
handset.
5.9

Flash button (R)

When you press the R button, also called flash or recall, the unit generates a line interruption
(of 100 ms or 250 ms). It gives you the possibility to use the special services of your
telephone provider and/or to transfer calls when you have a telephone exchange.
5.9.1 Setting the Flash time
Press and hold the redial button
'Short' for 100ms or 'Long' for 250ms
from the display

5.10 Setting the ring volume and melody

5.10.1 Handset melody
Press and hold the melody button
melody (1-9) by means of the scroll keys
5.10.2 Handset ring volume
Press the volume button
Use the scroll keys
the setting.
You can turn the ringer volume of each individual handset ON or OFF by
simply press and hold the
5.10.3 Base melody
Press Menu button
Use the Right
5.10.4 Base volume
Press Menu button
Use the Right

5.11 Key lock

When the keypad is locked, pressing any key will have no effect during standby (except
holding the key).
Press and hold the
and hold the key again to un-lock the keypad.
10
on the base unit, the handset emits a ringing signal for
for 3 sec.
until the current melody is heard.
in standby.
to select the desired volume (0-5).
Use the Right
and Left key to select the melody (1-9) and press OK
Use the Right
and Left key to select the melody (0-5) and press OK
key. appears on the display and the keypad is locked
The display will show:
The flash time setting will disappear after 2 sec.
. Press
The handset will ring in the current volume.
key in standby.
button to scroll to 'BS MELODY' and press OK
button to scroll to 'BS VOLUME' and press OK
Select the desired
again to confirm the setting.
Press again to confirm
Topcom Butler 4800/Twin/Triple/Quattro
.
.
Press