Panel Operations; Basic Operations - Yamaha PC412-D Owner's Manual

Hide thumbs Also See for PC412-D:

Table of Contents

5. Panel operations

① Main knob

Use this to move the position of the cursor, or to modify the value of a parameter.

For parameter values that have a wide range, the change accelerates according to the speed of rotation.

② [

](back) key

Each time you press this, you move from the current level back to the level above or back to the previous screen.

1. Turn the main knob to select an item. The selected item is highlighted.

If a ▶ is shown at the right, the item has a further level below.

2. Press the main knob to confirm the selection.

3. Repeat steps 1 and 2 to proceed to the desired parameter edit screen.

Editing a selection-type parameter

Turn the main knob to make a selection. When you press the main knob to confirm, the value is updated and also

applied to the sound.

4. For a selection-type parameter, press the main knob to confirm the edit.

[

]Press the (back) key to move to the previous screen.

PC412-D PC412-DI PC406-D PC406-DI Owner's Manual | 19

5. Panel operations

Table of Contents

Pc406-d Pc412-di Pc406-di