Basic Operation Of The Txn; Panel Operations - Yamaha TX6n Owner's Manual

Basic Operation of the TXn

Panel Operations

About the Display
Shows an alert message if a problem occurs
or if a user-specified event occurs.
Shows the contents of the
selected screen.
Switching Screens
By pressing a function button you can move to the screen
indicated above that button. By pressing the [HOME] button
you can move to the HOME screen. By pressing the [EXIT]
button you can move to the screen one level above.
Editing the Parameters
Use encoders A and B to move to the parameter that you
want to edit, and use encoder B to edit the value.
• When you edit a parameter in the UTILITY screen,
NOTE
press the [ENTER] button to confirm it after you finish
editing. A parameter that has not been confirmed will
flash. If you move the cursor or move to a different
screen without confirming the parameter, your change
will not be applied.
Function buttons [EXIT] button
Encoder A [HOME] button
Shows the names of the screens
assigned to the function buttons.
[ENTER] button
Adjusting the Attenuator
When the display shows the attenuator (i.e., in the HOME
screen or the METER screen), you can use encoders A and B
to adjust each channel's attenuation.
• If the display shows a screen other than the HOME
NOTE
screen or METER screen, encoders A and B are used
to set parameters.
Attenuator
Displaying the Meter
To display the meter, access the HOME screen and press the
left-most function button (METER). You can change the
meter type by using the left-most function button (PREV)
and the right-most function button (NEXT).
Level meter
Encoder B
TX6n/5n/4n Owner's Manual
9