1. Introduction
1.3. Features
• Four-channel power amp with both high audio quality and high power
• Equipped with a variety of signal processing functionality such as PEQ and FIR filter
• 20×8 matrix function allows flexible audio routing
• Allows high-quality digital audio transmission via a Dante network
• Supports software such as ProVisionaire Amp Editor and ProVisionaire Control for each phase of system
design and operation
• Supports both high-impedance connections and low-impedance connections (PC-DI series only)
1.4. Included items
• Power cord ×1
• Handles ×2
• Grill L ×1
• Grill R ×1
• Filter element L ×1
• Filter element R ×1
• Small screws for handle (M5×12mm)×4
• Euroblock plug mini for GPI (8-pin)×2
• Euroblock plug for analog input (3-pin)×4 (PC-DI series only)
• Euroblock plug for speaker output (8-pin)×1 (PC-DI series only)
• Cable ties ×4 (PC-DI series only)
• 2-conductor–3-conductor adaptor (PC406-D and PC406DI only)
• Quick Start Guide
1.5. Documentation
• Quick Start Guide (packaged with the product)
This explains installation and basic use.
• Owner's Manual (this document)
This explains all items necessary for setup and operation.
• ProVisionaire Amp Editor Setup Guide (HTML)
This explains how to use the ProVisionaire Amp Editor software to control this product from a computer.
2 | PC412-D PC412-DI PC406-D PC406-DI Owner's Manual