Home Screen; Device Information - Yamaha PC412-D Owner's Manual

10. UTILITY screen

10.4. HOME SCREEN

① METER
This specifies the position of the meter that is shown in the HOME screen.
INPUT: Immediately before the volume. This allows you to monitor the input signal even if the volume is turned
down.
OUTPUT: Immediately before the speaker output jack. This allows you to monitor the signal that is actually being
output from the speaker output jack.

10.5. DEVICE INFORMATION

This screen shows the state of this unit and information specific to it.
① THERMAL PSU
This shows the temperature of the power supply section in three levels. If the maximum indication is reached, a
limiter is applied.
② THERMAL AMP
This shows the temperature of the amp section in five levels. A limiter is applied according to the temperature.
③ BATTERY
This shows the state of the internal battery in three levels.
NOTE
• When the battery runs down, this indicates LOW or NO. If this occurs, immediately contact your
dealer listed at the end of the quick guide (separate document) to have the backup battery replaced.
④ RUN TIME
This indicates the total operating time of this unit.
⑤ VERSION
• FIRMWARE: Indicates the firmware version.
• Dante: Indicates three Dante-related versions.
• SERIAL: Indicates the serial number of this unit.
PC412-D PC412-DI PC406-D PC406-DI Owner's Manual | 59